Day 24: An Open Mind

I pride myself on always keeping an open mind. I like to think of myself as free of prejudice, and always looking for the good in others. I’m sure many of you do, too. It’s tough to see your blindspots sometimes, though.

I was born and raised in the New York city area. I lived for nearly all of my first 40 years either in or within a few minute’s drive from the city proper. So when I moved to Texas in 2008, I was a bit afraid – after all, how is a New York-style liberal elite atheist ever going to fit in there?

I was in San Antonio for all of 2 days before I had my first encounter. I was at a gas station filling up my car (a Civic Hybrid with NY state license plates) when a typical Texas pickup truck pulls up to the pump behind me. The driver’s door opens, and out steps a large man in full cowboy regalia: cowboy boots (of course), jeans, big-ass belt buckle, plaid shirt. He looked like this guy except he didn’t have a cowboy hat on – but I’m sure it was in his truck’s cab:

man wearing green plaid shirt, jeans, tan boots, belt and cowboy hat.

“OK”, I thought nervously, “I’m about to get my first ass-kicking!”. I could see him looking at me and my car with a serious expression on his face. After a little while he calls out to me “Hey – you from New York?”. If you know what a Texas accent sounds like, be sure to read his words with that accent, because he sounded just like that.

Given that my car had NY plates, I answered that yes, I was from New York. He then asks “What brings you around these parts?”. I got a little more nervous, expecting to be met with some sort of “we don’t like your type around here!” aggression. I replied to him that I had gotten a job here in San Antonio, and had just arrived in town.

He then breaks out in a big smile, and says “Well, welcome to Texas!”.

I thanked him, but immediately felt terrible. I had looked at this man, seen his appearance, and assumed that he was some backwards, hate-filled redneck who was looking for any excuse to kick my ass. Instead, he was a very friendly and warm person. I wasn’t as open-minded as I had imagined I was. I had let a stereotype control my perceptions of another person.

I think of this event a lot these days, especially with the news of white people calling the cops on black people because they “didn’t look like they belonged there”. We all have these stereotypes, and need to be mindful of them to keep our irrational reactions in check. Getting rid of those stereotypes is a process, and we all have work to do.

Recognizing that we all are not perfect in no way excuses acting on those perceptions as if they were fact. I do hope that the Karens of the world eventually see themselves and their biases and become a little more aware that some people just look different than you do, and that’s OK. I do admit to being skeptical of this change happening anytime soon, though. Attitudes sometimes take a generation or more to change, and the systemic racism in this country is very deep-rooted. It may take longer.

Day 23: Master

The tech world is reconsidering its use of the term “master”, as it has an association with slavery. Several years ago debate began about renaming the Master/Slave database replication design with something that did not conjure those horrible images from our past. Suggestions like Main/Secondary, or Primary/Replica have gotten traction, and several products have switched to these less offensive terms.

Last week GitHub announced that they working on replacing the name “master” in its service with a more neutral term, such as “main”.

Similar efforts are underway to replace the use of “whitelist/blacklist” with color-neutral terms such as “acceptlist/denylist”. All of this is being done in response to the increased awareness of the systemic racism that underlies so much of our society.

There has been some backlash, of course. While it was difficult to deny the obvious connection with “master/slave” to racism, some people are objecting to these latest proposed changes as being empty gestures. After all, the term “master” for a git branch doesn’t have a corresponding “slave” branch; it simply signifies the main/primary branch for development. Likewise for “blacklist/whitelist” – the term “blacklist” has its origin in 1639 England. “Whitelist” was coined later as the opposite of blacklist. Neither of these choices for color names had anything to do with racial notions of one race being better than another.

They also make the slippery slope argument: if we remove the master branch in git, will we have to also rename the master bedroom in our houses, or re-issue Masters degrees with a new name, or change our padlocks to some brand other than Master?

The thing about these objections is that they ignore the bigger picture: while those terms may have arisen perfectly innocently, they currently raise feelings of racial discrimination. And if you’re white like me, it’s not your call. Listen to what people of color are saying. If they say that it bothers them, that should be sufficient to make that change.

Changing these names to something neutral is not that big a deal*, but fighting those changes shows a real insensitivity to the feelings of others. “It doesn’t bother me; why should it bother you?” is a way of telling others that you really don’t care about them. Why wouldn’t you want to do these very small things in order to demonstrate a bit of empathy?

*git branch -m master main – was that so hard?

Another example along these lines is the word niggardly. It has absolutely nothing to do with race; it simply means “cheap” or “in short supply”. But why use a word that is so close to such an offensive term (you thought of that word when you read “niggardly”, didn’t you?) when there are so many perfectly good synonyms that avoid that association.

Choosing to use terms when you are conscious of its negative association, and have perfectly acceptable alternatives, seems unnecessarily provocative. Of course this won’t “solve” racism, but it is a very tiny step in the right direction.

Day 22: The New Brood

If you’ve been reading this blog, you know that I raise caterpillars. How do you find caterpillars to raise, though? The best way to grow the types of plants that the species of butterfly you are interested in likes to lay her eggs.

For the Eastern Black Swallowtail, which is what I primarily like to raise, the plants include parsley, rue, dill, carrot, fennel, and a few others.

Part of my daily routine during the summer is to check these plants for eggs. They’re tiny and hard to see, but when you know what to look for it makes it easier. I found the group of 3 eggs that Lazarus came from a few weeks ago, which was a bit early in the season. Since then, nothing.

Until last Friday.

29 (count ’em) swallowtail eggs

I began inspecting one of the rue plants, and immediately saw an egg. So I grabbed a scissors and a small container. This way I could trim the part of the leaf with the egg, and save it in the container. I collected that egg, and began checking out the rest of the plant. There’s another one! And another! It seemed that everywhere I looked I found another egg!

After I was sure I got all the eggs from the rue, I moved on to the parsley plants. Sure enough, there were several more on those plants, too. It took some time, but I was finally sure that I had found them all. Back indoors I very carefully arranged the various plant clippings so that the eggs were visible, and took the photo above. Prior to this, the most eggs I had ever found was 6, so finding 29 at once was incredible! Over the next 2 days I found 5 more, bringing the grand total to 34. I’m going to need a bigger housing for them!

Someone asked me why I bring them indoors, where the temperature is much cooler than they would be exposed to outside. There are several reasons, but the primary reason is that it shields them from predators. I did some research online first to make sure that it wouldn’t be harmful to be indoors, and there does not seem to be any problems with it. The results I’ve gotten have borne that out.

Freshly-hatched caterpillars!

This morning the eggs began hatching. As soon as they hatch they start eating the leaf they are on, which is pretty wilted by now, so I add fresh host plant material for them to munch on. Can you find all the caterpillars in the photo above? I can see at least part of 14 caterpillars. There are also 2 unhatched eggs visible, and if you look at them closely, you can see that they are no longer the smooth yellow color of the newly-laid eggs.

Those stripes are the segments of the soon-to-be-hatched caterpillar. I imagine that these are from the 5 eggs that I found after the first batch, as they seem to be a day or two behind in development.

This will certainly be a good test of my caterpillar-raising skills in trying to help 34 different creatures grow to adulthood. I’ll be sure to post about any significant events in that process in the weeks to come.

Day 21: Disc Golf Intro

I am a beginner at disc golf, and am just beginning to understand all the different things you need to know. I thought I’d write some of them down in order to clarify them in my mind.

While I’m new to disc golf, I have been throwing Frisbees since I was in high school. Most of the time we free-styled, where you try to do tricks with your catches and throw with different styles. Here’s a photo of me in college with a disc:

Me, with more hair and less belly!

My younger son Dan has been playing disc golf, and gotten pretty good at it. He came to visit us the past January, and took me out to play a few rounds. Disc golf uses very different discs than Frisbees, and they come with all sorts of different characteristics that affect how they fly. Dan gave me a crash course, but it was a lot to keep straight! He let me use some of his discs, but once he went back home I needed some of my own.

I went to a sporting goods store that carried some discs, and more or less blindly picked a couple. I knew that there were drivers for getting distance, and putters for accuracy on the short shots. I bought the Innova Destroyer driver, and the Innova Colt putter.

There is a disc golf course not too far from my house: Pearsall Park. Besides being close by, it’s very hilly, and is a good workout just walking the course! The first hole is pretty open, so I threw my driver. It did not fly like I thought it would; it just turned over quickly to one side and crashed to the ground without going very far. The Colt, though, flew just fine. In fact, it flew straighter and longer than the Destroyer! This made no sense to me: why would a putter fly further than a driver?

Afterwards I texted Dan about this, and he explained that the Speed rating of the Destroyer was too high for me. I didn’t understand: wouldn’t the speed rating mean that it would fly faster?

No, it turns out. It doesn’t mean that at all. What it means is the speed at which the disc must be thrown in order to achieve the flight it was designed for. The Destroyer is Speed: 12, and I’m just not able to throw that hard yet. So when I threw it, it never got into the flight it was designed for. The Colt, though is Speed: 3, which I’m certainly capable of throwing. So I was able to get a good throw (albeit a relatively short one) with the Colt, and couldn’t throw the Destroyer reliably.

Guess I had some reading up to do! I found many good sources online, and soon felt confident enough to order new discs. I say “order” because by now the pandemic had forced businesses to close, so online was the only way to go. They’ve worked out much better for me, and slowly but surely I’m improving.

I’ll try to summarize what I’ve learned about disc flight characteristics in a future post. But for now I’m taking advantage of my unemployed state to practice disc golf as often as I can.

Day 20: Lazarus Update

A couple of days ago I wrote about our miracle caterpillar, which we named Lazarus, due to its ability to come back from the dead. I don’t have much on my mind that I want to write about today, so I thought I’d give you an update.

Purged!

Lazarus continued eating and pooping, as caterpillars do. Yesterday, though, it reached the transition point in its lifecycle, where it stops being a caterpillar and becomes an adult butterfly. What the caterpillar will do at that point is stop eating, and because it will no longer be able to digest, it “purges” – it vomits up the contents of its digestive system. In the photo above you can see the circular stain with a dark center mass. Well, you can sort of see it; I keep the caterpillars in a collapsible laundry hamper with nylon mesh sides that allow you to see through somewhat, and that makes the image a little unclear.

Once they’ve purged, they begin to wander in search of a place to attach themselves. I created something for them to use, and most of the caterpillars end up pupating on it.

Caterpillar housing

You can see it in the center – it’s just a few sticks glued together. Again, due to the nylon mesh it’s difficult to see clearly, so here’s a photo I took last summer at the peak of pupa season:

Five pupas

So yeah, the caterpillars seem to like this arrangement. But not Lazarus! If you look closely at the top left of the photo of the caterpillar housing, you’ll notice something:

Lazarus wandered all over the enclosure, and then decided to attach to the top panel! It still hasn’t pupated, but I expect that to happen later today. I’ll update this post with an image of that when it happens.

UPDATE:

Two hours later, and Lazarus has shed his caterpillar skin, and become a bona-fide pupa! Now the long wait until the beautiful butterfly emerges.